From brand-new systems to radiator upgrades and smart controls, our Gas Safe registered engineers design and fit central heating that warms every room evenly and keeps running costs down. We work with homeowners right across Newcastle Upon Tyne, and every quote is free and clearly priced from the start.
Good central heating is about more than a warm living room. It should bring every room up to a comfortable temperature, hold it there without constant fiddling, and do it without burning through gas. That is what we aim for on every job, whether we are fitting a complete system in a home that has never had one or breathing new life into an older setup.
A system is only as good as its design. The boiler matters, but so do the radiators, the pipework and the controls. When each radiator is the right size for its room, the pipes are clean and the controls are set up properly, heat reaches every corner of the house evenly. Get that balance right and you are comfortable sooner and spending less to stay that way.
If your home has no central heating, or you are starting fresh in a renovation or extension, we design and fit the whole system from the ground up. That means sizing a boiler to suit the property, planning the pipework runs, choosing radiators to match each room and setting up controls that are easy to live with.
Every installation starts with a free survey. We look at the size and layout of your home, how you use it and what you want from your heating, then put together a clear, fixed-price quote. There is no obligation and no pressure. When the work is booked, our Gas Safe engineers fit everything tidily, test it thoroughly and leave you with a system that is ready to use and simple to understand.
Older central heating often limps along for years, costing more than it should and never quite warming the house the way it used to. Sludge builds up in the radiators and pipes, controls are basic or worn out, and the boiler struggles against it all. Upgrading the system — rather than patching one part at a time — usually makes a noticeable difference to both comfort and bills.
We will tell you honestly what is worth keeping and what is better replaced. Sometimes a new boiler, fresh controls and a thorough clean are enough to transform how a system performs. Other times, replacing tired radiators and pipework is the sensible move. Either way, you get a straight recommendation and a fixed price before any work begins.
The parts you see and touch every day make a big difference to how well your heating works. Here is how the main ones fit together.
A radiator that is too small will never warm a room properly, while one that is too large wastes energy. We work out the right output for each space based on its size, windows and how it is used, then fit or replace radiators to suit. The result is steady, even heat without cold spots or wasted gas.
A thermostatic radiator valve is a simple control fitted to each radiator that lets you set a different temperature in every room. Turn bedrooms down, keep living spaces cosy, and stop heating rooms you rarely use. TRVs are an inexpensive upgrade that give you much finer control over where your heat goes.
Smart thermostats such as Nest and Hive let you set heating schedules around your daily routine and adjust the temperature from your phone, whether you are upstairs or on your way home. Paired with TRVs, they make it easy to heat only the rooms you are using, at the times you actually need them.
Have you ever noticed the radiator nearest the boiler roasting while the one furthest away stays lukewarm? That is a system that has not been balanced. Balancing means adjusting the flow through each radiator so they all heat up at a similar rate, which is one of the most overlooked steps in getting a system right.
We balance every system we install or upgrade, and we can balance an existing one as a standalone job too. It is a quiet bit of fine-tuning that makes a real difference: rooms warm up evenly, the boiler works less hard, and you feel comfortable for less money. Combined with a clean system and good controls, balancing is often what separates heating that simply works from heating that works brilliantly.
There is no single price for central heating, because no two homes are the same. The main things that shape the cost are the size of your property, the number of radiators you need, the type of boiler and controls you choose, and how much pipework has to be run or re-routed. A compact flat with a handful of radiators is a very different job from a large family home with zoning across several floors.
Rather than guess, we survey your home, talk through what you want and give you a clear, fixed-price quote that spells out exactly what is included. That way you can make a confident decision with no hidden extras. The quote is always free and comes with no obligation.
Built an extension, converted a loft or finally want to heat that chilly back room? In most cases we can add radiators to your current system rather than starting over. First we check that your boiler and pipework have the capacity to take on the extra demand, then we run the new pipework, fit the radiator and re-balance the whole system so everything still heats evenly.
If your existing system is already working hard, we will say so and explain the options honestly, so you only spend on what your home genuinely needs. When you are ready, send us a few details using the form and we will arrange your free survey and quote.
Yes. We design and install complete central heating systems from scratch — boiler, radiators, pipework and controls — and we upgrade or extend existing systems too. Every install starts with a free survey and a fixed-price quote.
We regularly fit smart thermostats such as Nest and Hive, along with thermostatic radiator valves and zoning, so you can control each area of your home separately and heat only the rooms you are using.
It depends on the size of your property, the number of radiators, the boiler and controls you choose, and how much pipework is involved. We assess your home during a free survey and give you a clear, fixed-price quote with no obligation.
In most cases, yes. We check that your boiler and pipework can handle the extra demand, then add or relocate radiators and re-balance the system so every room heats evenly.
Usually it is one of two things: trapped air, which a bleed will clear, or a system that needs balancing so heat reaches the radiators furthest from the boiler. Sludge build-up can also be the culprit. We can diagnose the cause and put it right so the whole system heats evenly again.
Most full installations take a few days, depending on the size of the property and how much pipework is needed. Smaller jobs like adding a radiator or fitting new controls are often done in a day. We will give you a realistic timescale with your quote.
Tell us a little about your home and we will arrange a free survey and a clear, fixed-price quote for your central heating in Newcastle.